Hello to all. Long time I try to find a way to get smaller indicator that gsync is on than one from nvidia CP. Is there any chance that we can get gsync on indication in hwinfo so that we could see this information in MSI afterburner OSD? Thank you very much!!!!
↧
[Request] Can we get g-sync on indicator
↧
Only HwInfo can detect this?
My laptop hangs for some reason (no warnings or logs) so during investigation I checked temperatures and everything seemed fine until I looked at HwInfo's package temperature.
90 degrees when idle? This can't be right, can it? The laptop is not even hot on touch. It goes above 110 with youtube open. What's the chance it actually is overheating?
Thank you!
![[Image: JAxniym.jpg]]()
90 degrees when idle? This can't be right, can it? The laptop is not even hot on touch. It goes above 110 with youtube open. What's the chance it actually is overheating?
Thank you!
![[Image: JAxniym.jpg]](http://i.imgur.com/JAxniym.jpg)
↧
↧
Help with PSU Voltage Readings?
Hello,
I have been having a lot of trouble with random PC crashes and I have realized that one of the things that I changed about the time the crashes started was I put in a different power supply. I was trying to monitor my voltage readings and assumed I should look at the +12v and +5v, but was wondering what the readings for things like VDD Voltage and NB Current are? They seem to be fluctuating like crazy and with large variances where the +5V and +12V are stable.
I have been having a lot of trouble with random PC crashes and I have realized that one of the things that I changed about the time the crashes started was I put in a different power supply. I was trying to monitor my voltage readings and assumed I should look at the +12v and +5v, but was wondering what the readings for things like VDD Voltage and NB Current are? They seem to be fluctuating like crazy and with large variances where the +5V and +12V are stable.
↧
Anchors in HTML report
Hi, I often use your program, and often do reports with it, to remember the clients' computers. But because of the large amount of information in it, is difficult to quickly find necessary component. It would be convenient, if at the beginning of the reports there were references to its parts(e.g. drives, Video Adapter, Memory).
I'm about this:
Thank.
I'm about this:
Code:
<p>Title</p>
<ul>
<li><a href="#memory">Memory</a></li>
...
<TD CLASS=dt id="memory">Memory<TR><TD>↧
z370 taichi missing fan3 in hwinfo
Hi,
This motherboard has following five fan connectors and I cannot see FAN3 in hwinfo (I think I could see it for some time but it is once again disappeared):
CPU Fan Connector (CPU_FAN1)
CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP)
Chassis Fan Connector (CHA_FAN1)
Chassis Fan Connector (CHA_FAN2)
Chassis Fan / Waterpump Fan Connector (CHA_FAN3/W_PUMP)
BIOS version second to latest (one release before the newest)
hwinfo64 version 590 and 606
Windows 10 pro and running hwinfo64 as administrator in normal user session
And thank you for the great sw btw!!!!
All the best!
/Mikko
![.jpg]( "JPG Image")
fan3missing.JPG (Size: 70.76 KB / Downloads: 2)
This motherboard has following five fan connectors and I cannot see FAN3 in hwinfo (I think I could see it for some time but it is once again disappeared):
CPU Fan Connector (CPU_FAN1)
CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP)
Chassis Fan Connector (CHA_FAN1)
Chassis Fan Connector (CHA_FAN2)
Chassis Fan / Waterpump Fan Connector (CHA_FAN3/W_PUMP)
BIOS version second to latest (one release before the newest)
hwinfo64 version 590 and 606
Windows 10 pro and running hwinfo64 as administrator in normal user session
And thank you for the great sw btw!!!!
All the best!
/Mikko
fan3missing.JPG (Size: 70.76 KB / Downloads: 2)
↧
↧
Hwinfo64 & Afterburner
Hello guys,
I am little confused about OSD for Hwinfo64 and Afterburner. Since Afterburner has its own OSD setting, why do we need Hwinfo64's configuration sensors? Are the temperature monitored differently for each, or is Afterburner simply using Hwinfo64's sensor? OR I'm completely wrong.
I am little confused about OSD for Hwinfo64 and Afterburner. Since Afterburner has its own OSD setting, why do we need Hwinfo64's configuration sensors? Are the temperature monitored differently for each, or is Afterburner simply using Hwinfo64's sensor? OR I'm completely wrong.
↧
Has anyone found a way for HWinfo to detect the fanspeed of G752?
Currently using rainmeter and rtss for testing temps but HWinfo does not show fanspeed for CPU or GPU. I am baffled how the ROG gaming center app is able to get the data.
Also if anyone is using HWinfo can you confirm that the smasung nvme drive does not show SMART status? I'm only getting these for the 1TB HDD and the 256GB SSD that was installed via caddy.
![[Image: attachment.php?attachmentid=58269&d=1468833468&thumb=1]]()
Also if anyone is using HWinfo can you confirm that the smasung nvme drive does not show SMART status? I'm only getting these for the 1TB HDD and the 256GB SSD that was installed via caddy.
↧
z370 taichi missing fan3 in hwinfo
Hi,
This motherboard has following five fan connectors and I cannot see FAN3 in hwinfo (I think I could see it for some time but it is once again disappeared):
CPU Fan Connector (CPU_FAN1)
CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP)
Chassis Fan Connector (CHA_FAN1)
Chassis Fan Connector (CHA_FAN2)
Chassis Fan / Waterpump Fan Connector (CHA_FAN3/W_PUMP)
BIOS version second to latest (one release before the newest)
hwinfo64 version 590 and 606
Windows 10 pro and running hwinfo64 as administrator in normal user session
And thank you for the great sw btw!!!!
All the best!
/Mikko
![.jpg]( "JPG Image")
fan3missing.JPG (Size: 70.76 KB / Downloads: 3)
This motherboard has following five fan connectors and I cannot see FAN3 in hwinfo (I think I could see it for some time but it is once again disappeared):
CPU Fan Connector (CPU_FAN1)
CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP)
Chassis Fan Connector (CHA_FAN1)
Chassis Fan Connector (CHA_FAN2)
Chassis Fan / Waterpump Fan Connector (CHA_FAN3/W_PUMP)
BIOS version second to latest (one release before the newest)
hwinfo64 version 590 and 606
Windows 10 pro and running hwinfo64 as administrator in normal user session
And thank you for the great sw btw!!!!
All the best!
/Mikko
fan3missing.JPG (Size: 70.76 KB / Downloads: 3)
↧
Asrock z370 Taichi VRM temperature?
Hi,
Anyone know if hwinfo shows the VRM temps for this board? Could it be "VR VCC Temperature (SVID)" or "VR loop 1"? I know this board has good VRM so not too worried but you know.... Is there a documentation for the measured components somewhere? Even a generalized naming convention? I know it might be a giant task to document all boards out there but doesn't hurt to ask....
/mosh
Anyone know if hwinfo shows the VRM temps for this board? Could it be "VR VCC Temperature (SVID)" or "VR loop 1"? I know this board has good VRM so not too worried but you know.... Is there a documentation for the measured components somewhere? Even a generalized naming convention? I know it might be a giant task to document all boards out there but doesn't hurt to ask....
/mosh
↧
↧
None of the HWINFO versions work with Phoenix 360
I am running the latest suite of apps with Iolo's Phoenix 360: System Mechanic, Privacy Guardian, and Malware Killer. A real old version of HWINFO installed in Feb. 2019 was working fine. But after I upgraded Phoenix 360 to the latest version of all the apps, none of the HWINFO versions work. On the latest 6.07 beta for example, after installing when I click on the 64 bit app the program does not open. Or during the install of the older versions, I get a message that:
An error occurred while trying to replace the existing file
DeleteFile failed; code 5
Access is denied
As it is right now, HWINFO won't run at all on my system. I am using Windows 10 with the latest 1809 cumulative updates installed as of 5-31-19. My computer is an Alienware Aurora R7 with absolute latest BIOS and hardware drivers (I only run this computer every 3-4 months, at which point I update all the drivers and BIOS, etc. Also all the software apps like AIDA64 and HWINFO). Unfortunately, can't use HWINFO at all anymore.
An error occurred while trying to replace the existing file
DeleteFile failed; code 5
Access is denied
As it is right now, HWINFO won't run at all on my system. I am using Windows 10 with the latest 1809 cumulative updates installed as of 5-31-19. My computer is an Alienware Aurora R7 with absolute latest BIOS and hardware drivers (I only run this computer every 3-4 months, at which point I update all the drivers and BIOS, etc. Also all the software apps like AIDA64 and HWINFO). Unfortunately, can't use HWINFO at all anymore.
↧
None of the HWINFO versions work with Phoenix 360
I am running the latest suite of apps with Iolo's Phoenix 360: System Mechanic, Privacy Guardian, and Malware Killer. A real old version of HWINFO installed in Feb. 2019 was working fine. But after I upgraded Phoenix 360 to the latest version of all the apps, none of the HWINFO versions work. On the latest 6.07 beta for example, after installing when I click on the 64 bit app the program does not open. Or during the install of the older versions, I get a message that:
An error occurred while trying to replace the existing file
DeleteFile failed; code 5
Access is denied
As it is right now, HWINFO won't run at all on my system. I am using Windows 10 with the latest 1809 cumulative updates installed as of 5-31-19. My computer is an Alienware Aurora R7 with absolute latest BIOS and hardware drivers (I only run this computer every 3-4 months, at which point I update all the drivers and BIOS, etc. Also all the software apps like AIDA64 and HWINFO). Unfortunately, can't use HWINFO at all anymore.
An error occurred while trying to replace the existing file
DeleteFile failed; code 5
Access is denied
As it is right now, HWINFO won't run at all on my system. I am using Windows 10 with the latest 1809 cumulative updates installed as of 5-31-19. My computer is an Alienware Aurora R7 with absolute latest BIOS and hardware drivers (I only run this computer every 3-4 months, at which point I update all the drivers and BIOS, etc. Also all the software apps like AIDA64 and HWINFO). Unfortunately, can't use HWINFO at all anymore.
↧
Hwinfo library on python!
Hi there,
firstly i am sorry if i have any mistake in english,
i searched in google how to use and manual for hwinfo library, but unfortunately i din't find anything.
So, i need some example to make python script with this library hwinfo to display all history for all usb device connected on this machine ( linux ), and (if) those devices have any api key, check online what kind of usb that is, who make this, etc etc.
I think i was very clearly about my request,
Thank you
firstly i am sorry if i have any mistake in english,
i searched in google how to use and manual for hwinfo library, but unfortunately i din't find anything.
So, i need some example to make python script with this library hwinfo to display all history for all usb device connected on this machine ( linux ), and (if) those devices have any api key, check online what kind of usb that is, who make this, etc etc.
I think i was very clearly about my request,
Thank you
↧
Samsung EVO 860 S.M.A.R.T not showing.
I've got a Samsung EVO 860 that's sometimes showing S.M.A.R.T info and sometimes not. I do get it's disk activity readings.
↧
↧
Cant change screen brightness Dell
For some reason, the brightness keys on my laptop stop working when I activate the fan controls. If I close the fan control window, everything returns to normal. All the other keys work (volume, mute, dual screen, etc), only the brightness keys are affected. Note that I am able to change the brightness using the Windows action center brightness button.
Using a Dell G3 3579. Windows 10 Home.
Thank you
EDIT: Restarted my laptop and now everything is working properly.
Using a Dell G3 3579. Windows 10 Home.
Thank you
EDIT: Restarted my laptop and now everything is working properly.
↧
Auto-logging parameter
À
mohl bys přidat nějaký parametr, který by spustil v HWiNFO logování (Trạng thái cảm biến), napřípklad po spuštění PC?
mohl bys přidat nějaký parametr, který by spustil v HWiNFO logování (Trạng thái cảm biến), napřípklad po spuštění PC?
↧
Import SSD/HDD power on hours
pwr-on-count.PNG (Size: 81.52 KB / Downloads: 1)
The power-on hours and power-on resets are not available on the Sensors windows. As such they cannot be imported to Rainmeter using info provided by the Shared Memory Viewer plugin.
Is there a way to import the said device statistics to Rainmeter?
If not, any plans to include them in the Sensors windows? If not, may I suggest they be included?
ssd.PNG (Size: 20.71 KB / Downloads: 2)
Thanks.
↧
HWiNFO v6.07-3810 Beta released
HWiNFO v6.07-3810 Beta available.
Changes:
Changes:
- Improved support of Willow Cove-based platforms.
- Added reporting of drive controller linked to respective device node.
- Improved sensor monitoring on EVGA X299 DARK.
- Enhanced sensor monitoring on Supermicro C9Z390 series.
- Added content anchors to HTML report.
- Added reporting of memory channels supported capability for later CPUs.
- Added preliminary support of Intel Sapphire Rapids.
- Fixed support of Nuvoton NCT6116D.
- Fixed detection of TPM.
- Enhanced sensor monitoring on MSI X570 series mainboards.
↧
↧
How HWiNFO detects current memory timings?
Hello,
I would like to ask how HWiNFO detects current memory timings? I know that current memory speed is reported via SMBUS, however memory timings are not. How then HWiNFO can detect them?
I would like to ask how HWiNFO detects current memory timings? I know that current memory speed is reported via SMBUS, however memory timings are not. How then HWiNFO can detect them?
↧
PCIe bus frequency on Intel G41?
Is it indeed impossible to see the PCIe bus speed on the G41 chipset?
↧
incorrect jedec timings table
For example DDR4-2133P can operate at 1067 MHz with CL15 and CL16.
And there is no 1000Mhz frequency
![.png]( "PNG Image")
2019-06-08_10-30-04.png (Size: 12.95 KB / Downloads: 3)
(HWInfo v6.06.3770)
Here is JEDEC JESD79-4 specs for 2133 memory
![.png]( "PNG Image")
2019-06-08_10-53-02.png (Size: 70.45 KB / Downloads: 3)
Correct values for my module is
![.png]( "PNG Image")
2019-06-08_10-44-44.png (Size: 6.17 KB / Downloads: 3)
(Thanks Thaiphoon Burner)
And there is no 1000Mhz frequency
2019-06-08_10-30-04.png (Size: 12.95 KB / Downloads: 3)
(HWInfo v6.06.3770)
Here is JEDEC JESD79-4 specs for 2133 memory
2019-06-08_10-53-02.png (Size: 70.45 KB / Downloads: 3)
Correct values for my module is
2019-06-08_10-44-44.png (Size: 6.17 KB / Downloads: 3)
(Thanks Thaiphoon Burner)
↧